HANGAR 1O AERO, LLC
                    Sport Flying the Light Way

RUNWAY 32

HANGAR

POLY-FIBER

RANS AIRCRAFT

HATZ BANTAM

CONTACT


S-6ES Coyote II                                                                  

DESCRIPTION

SPECIFICATIONS

PERFORMANCE

PAINT YOUR PLANE

 

 

CALL FOR CURRENT PRICING AND OPTIONS

BASE PRICES LESS FIREWALL FORWARD
Airframe Kit 
including all standard features
 
ENGINE INSTALL KITS
Rotax 912  
Rotax 912S  
Upgrade to Super Six Cowling/12"Spinner  
ENGINES
Rotax 912  
Rotax 912S  
PROP OPTIONS
2-Blade Tennessee Wood Prop
  Hardware to install add:
 
2-Blade Sensenich Wood Prop (912S)
  Hardware to install add:
 
2-Blade Ground Adjustable Composite Prop
  Hardware to install add:
 
2-Blade Warp Drive Ground Adjustable Prop
  Hardware to install add:
  With nickel leading edges add:
  With tapered blades add:
 
3-Blade Warp Drive Ground Adjustable Prop (912S)
  Hardware to install add:
  With nickel leading edges add:
  With tapered blades add:
 
CONFIGURATION
Tricycle Gear  
Taildragger  
QUICK BUILD OPTIONS
Pre-built Tail Cone:  Built and attached to cockpit cage
Trike  
Tail Dragger  
The S-6ES quick build includes:
Pre-built wings with fuel tanks installed.  
Wings are covered.
Pre-built tail pieces with covering installed.
Pre-built fuselage includes pre-built tail cone option plus installation of any parts that must be assembled prior to covering.  Fuselage covering is installed.
Quick Build:  + to kit price  
Add for Standard Clear Coat + to kit cost  
TIRE/BRAKE OPTIONS 
The S-6ES comes standard with 6" aircraft grade tires and pilot's side single hydraulic brakes.
Tundra Tires (tail dragger only)  
Trike gear up sized mains and nose wheel 
(includes and requires slightly larger fork)
 
Both Sides Hydraulic Brakes  
INTERIOR OPTIONS
Thermal Formed Plastic Interior includes behind the seat baggage compartment.  Available in grey.  For custom color, ask for a quote.  This option gives the S-6ES a true finished appearance.  
Tinted Glass (Available only for doors, windshield and skylight are clear only)  
Cargo Area Bolt in Style 
(does not require Thermal Formed Interior)
 
Heater muffler style for 912  
Heater (Radiant style, only with water cooled engines)  
Elevator Trim System 
(Tab Type) Specify Flap Mount or Center Panel Mount
 
Aft Baggage Compartment  
UPHOLSTERY OPTIONS
Standard upholstery is gray fabric with black piping
Head Rest  
OTHER OPTIONS
Gascolator  
Wheel Pants with Mount Kit
Tail Dragger 
Trike

Nose Gear Disconnect with Shimmy Dampener  
Yaw Stability Kit (Recommended for Floats)  
Full Lotus Float Adaptor Kit
(Available only for trike.  Price does not include spine tubes)
 
Swing Wing  
Whelen Strobe/Nav Light Kit  
Kuntzleman Strobes  
Aero Flash Strobe/Nav Light Kit  
Strobe Mount Kit  
Radio Mount Trays - Specify single, double or triple require Avionics T-Panel or Super Six Retro Upgrade  
Antenna Mount Bracket  
Complete Super Six Retro 
(Windshield/Top Deck/Instrument Panel/Cowling/12" Spinner)
 
Airframe Super Six Retro
(
Windshield/Top Deck/Instrument Panel)
 
Firewall Forward Super Six Retro
(purchase with engine install)
 
Avionic T-Panel (Includes triple radio tray)  
Map Box - Available only with Super Six style panel (not an after market product)  
Fillet Fairing (Wing to Strut)  
Main Gear Leg Fairings, Unpainted  
Nose Gear Leg Fairing, Unpainted  
Windshield Cover  
Pre-cut Panel (gray or black) Standard cut  

 

ORDER

All prices and products are subject to changes without notice.

Standard Equipment and Features

Welded 4130 cockpit cage comes powder coated
Cabin sky light
Root rib tension system on wings, ailerons and flaps
Aluminum tube tail cone assembles from pre-drilled parts
Dual rudder pedals
Hydraulic brakes
Aluminum main gear wheels
Tapered spring steel main gear
Telescoping spring nose gear or full swivel steerable tail wheel Deluxe upholstered seats with map pockets, 
          adjust fore and aft, 4 positions
Dual control sticks
Center dash mounted throttle
Single center flap handle
4 Position flaps
Aluminum framed bubble doors
Air vents
Aluminum airfoil struts 
3" Tubular Aluminum Main wing spar
2" Tubular Aluminum Trailing wing spar
Stamped aluminum ribs 
Sheet aluminum leading edge wrap 
Molded wing tips
In-cockpit fuel sump drains
9 Gallon fuel tank in each wing
Lap and shoulder belts
Differential ailerons
Dual elevator horns
Ailerons operated by cables and push-pull tubes
Ball Bearing aircraft control pulleys
Formed tail ribs
Folding wings 
Folding jury struts
4 Ounce Dacron skin in choice of colors

Engine Install Kits

ROTAX Engine Install Kits Include:
2-Blade wood prop
Aluminum and Fiberglass cowling
4-Point rubber isolated engine mount
Mount
Stainless Steel Muffler (912/912S)
Wiring
Oil Cooler
Hoses
Filters
Hardware
Exhaust (912/912S only) 
Cooling System (912/912S only) 
Everything you need to install engine!

Standard instruments include: 
ASI
RPM 
Hour meter 
(Instruments vary with engine install choice) 

The S-6ES is an FAA Approved 51% Kit - No welding required.  

Build Time: 350 to 550 hours
Quick Build Time:  150 to 250 hours

 

Copyright 2003-2011 Hangar 10 Aero, LLC