HANGAR 1O AERO, LLC
                    Sport Flying the Light Way

RUNWAY 32

HANGAR

POLY-FIBER

RANS AIRCRAFT

HATZ BANTAM

CONTACT


S-6S Coyote II                                                                  

SPECIFICATIONS

PERFORMANCE

OPTIONS
& PRICING

PAINT YOUR PLANE

ORDER

 

CALL FOR CURRENT PRICING AND OPTIONS

BASE PRICES LESS FIREWALL FORWARD
Airframe Kit 
including all standard features
 
ENGINE INSTALL KITS
Includes everything to install Rotax 912 or 912S   
ENGINES
Rotax 912  
Rotax 912S  
PROP OPTIONS
2-Blade Tennessee Wood Prop
  Hardware to install add:
 
2-Blade Sensenich Wood Prop (912S)
  Hardware to install add:
 
2-Blade Ground Adjustable Composite Prop
  Hardware to install add:
 
2-Blade Warp Drive Ground Adjustable Prop
  Hardware to install add:
  With nickel leading edges add:
  With tapered blades add:
 
3-Blade Warp Drive Ground Adjustable Prop (912S)
  Hardware to install add:
  With nickel leading edges add:
  With tapered blades add:
 
CONFIGURATION
Tricycle Gear  
Tail dragger  
QUICK BUILD OPTIONS
Pre-built Tail Cone:  Built and attached to cockpit cage
Trike  
Tail dragger  
The S-6S quick build includes:
Pre-built wings with fuel tanks installed.  
Wings are covered with dope and fabric.
Pre-built tail pieces with dope and fabric completed.
Pre-built fuselage includes pre-built tail cone option plus installation of any parts that must be assembled prior to covering.  Fuselage covering is complete.
Quick Build + to kit price  
2-Color paint on Quick Build + to quick build cost  
3-Color paint on Quick Build + to quick build cost  
TIRE/BRAKE OPTIONS 
The S-6 Super is provided standard with aircraft grade tires and single hydraulic brakes.
Tundra Tires (tail dragger only)  
Trike gear up sized mains and nose wheel 
(includes and requires slightly larger fork)
 
Both Sides Hydraulic Brakes  
INTERIOR OPTIONS
Tinted Glass (Available only for doors, windshield and skylight are clear only)  
Map Box (not an after market option)  
Heater muffler style for 912  
Heater (Radiant style, only with water cooled engines)  
Aft Baggage Compartment  
UPHOLSTERY OPTIONS
Standard upholstery is gray fabric with black piping
Head Rests  
OTHER OPTIONS
Gascolator  
Wheel Pants with Mount Kit
Tail Dragger 
Trike

Nose Gear Disconnect with Shimmy Dampener  
Yaw Stability Kit (Recommended for Floats)  
Windshield Cover  
Swing Wing  
Whelen Strobe/Nav Light Kit  
Aero Flash Strobe /Nav Light Kit  
Kunzleman Strobes  
Strobe Mount Kit  
Radio Mount Trays - Specify single, double or triple  
Tow Bar  
Pre-cut Panel (gray or black) standard cut  
Antenna Mount Bracket  

 

All prices and products are subject to changes without notice.

RANS S-6S Coyote II
Standard Equipment & Features

Full interior kit and baggage compartment 
Cabin sky light 
Aluminum tube tail cone 
Dual rudder pedals 
Single hydraulic toe brakes 
Aluminum main gear wheels 
Aircraft grade tires 
Tapered spring steel main gear
Telescoping spring nose gear or full swivel steer-able tail wheel Deluxe Upholstered seats with map pockets, 
     adjust fore and aft, 4 positions 
Dual control sticks 
Single panel mount throttle 
Single center flap handle; 
4 Position flaps 
Adjustable lift strut
Aluminum framed bubble doors 
Air vents; Aluminum airfoil struts 
3" Tubular Aluminum Main wing spar 
2" Tubular Aluminum Trailing wing spar
Welded 4130 cockpit cage comes powder coated 
In-cockpit fuel sump drains 
9 Gallon fuel tank in each wing 
Lap and shoulder belts 
Differential ailerons
Dual elevator horns 
Ailerons operated by cables and push-pull tubes 
Formed aluminum tail ribs
Folding wings
Folding jury struts
Many small parts come powder coated or anodized
Gear leg fairings provided 
Comes with 2.7 ounce aircraft fabric, all tapes, inspection plates, formed control exits, and fabric glue. 
Stamped aluminum ribs - Sport Wing only
Sheet metal leading edge - Sport Wing only

Engine Install Kits

ROTAX Engine Install Kits include: 
2-Blade wood prop 
Low drag fiberglass cowling and 12" spinner 
Cowling removes quickly with 1/4 turn fasteners 
4-Point rubber isolated engine mount 
Standard instruments include: 
     ASI, RPM, Hourmeter 
     (Engine instruments vary with engine choice) 
Muffler 
12” Spinner and Spacer
Hardware, Wiring, Hoses, and Filters
EVERYTHING YOU NEED TO INSTALL YOUR ENGINE!

The S-6S is an FAA Approved 51% Kit - No welding required. 

Build Time: 500 to 700 hours 
Quick Build Time:  250 to 350 hours

 

Copyright 2003-2011 Hangar 10 Aero, LLC